What Special Requirements are There for the Installation of Tea Cold Storage?
2025-01-09
The storage environment of tea directly affects its color and taste. What special requirements does a cold storage for storing tea have?
Precautions for the installation of a tea cold storage:
Moisture content in the cold storage: Under normal circumstances, the moisture content of tea should be around 3% - 5%.
Temperature of tea: Under normal circumstances, the temperature of tea should be around 0℃ - 5℃.
Moisture content in the cold storage: Under normal circumstances, the moisture content of tea should be around 3% - 5%.

Temperature of tea: Under normal circumstances, the temperature of tea should be around 0℃ - 5℃.


Specific requirements for the tea cold storage:
(1) The temperature control range of the green tea fresh - keeping cold storage is 0 - 8℃.
(2) The temperature control range of the oolong tea (Tieguanyin) fresh - keeping cold storage is around - 15℃.
(1) The temperature control range of the green tea fresh - keeping cold storage is 0 - 8℃.
(2) The temperature control range of the oolong tea (Tieguanyin) fresh - keeping cold storage is around - 15℃.
During the storage process, various changes will occur to the internal substances of tea, resulting in a decline in the sensory qualities such as color, aroma and taste. The magnitude of these changes is directly affected by conditions such as the moisture content, temperature, oxygen and light of the tea. Therefore, the temperature and humidity of the cold storage should be designed in strict accordance with the requirements of tea storage.
The insulation board used in the tea cold storage should be polyurethane color - coated steel plate. For a tea cold storage with a temperature range of 0℃ - 5℃, the cold - storage board used should be about 10 centimeters thick. This can ensure the insulation effect while saving materials and reducing operating costs.
Related Articles
- Analysis of Installation Requirements and Common Precautions for Cold Storage
- Control Requirements for the Variable Frequency Speed Regulation System of the Primary Chilled Water Pump
- Four Requirements for Refrigeration Systems Adopting Two - stage Compression Refrigeration Systems
- What Vacuum Requirements Do Cold Storage Equipment Have?
- Requirements and Maintenance for Building Meat Food Cold Storage
- Requirements of Cold Storage Insulation for Maintaining Stable Temperature Inside
- Temperature Requirements for Various Cold Storages
- Return Bend Setup and Installation Technical Requirements
- Types and Temperature Requirements of Seed Cold Storages
- Differences, Requirements and Standards between Pharmaceutical Cold Storage and Conventional Cold Storage
- Technical quality requirements for refrigerators after repair
- System Airtightness Experiment Requirements and Steps
- Prevention and Treatment of Common Quality Problems in HVAC Installation
- Precautions for the Installation of Automatic Instruments in Refrigeration Devices (Part Two)
- Installation Project and Usage Introduction of Parallel Compressor Units in Cold Storage
- Design, Model Selection, Installation, Electrical Control and Precautions of Small Cold Storage
- "Ten Forbidden Zones" and Precautions for Variable Refrigerant Flow (VRF) System Installation
- Solutions to Common Problems in the Installation, Maintenance and Use of Cold Storage
