EN / 中文

Why Is the Air Conditioner Flashing Yellow and the Compressor Not Working?

2024-10-10
The reason may be the phenomenon of the compressor protection device tripping. When the compressor overload protection trips, it indicates that the system high-pressure is too high or the overheating current is too large. Causes and troubleshooting of high pressure and overheating:
  1. Excessive refrigerant. Appropriate reduction of refrigerant charge.
  2. Poor heat dissipation. Check whether the condenser tube is dirty and clean the condenser.
  3. Blockage in the pipeline system. Judging and troubleshooting according to the pressure gauge, and reprocessing the system.
  4. Dust and scale accumulate on the evaporator or filter. The air flow becomes smaller, and the system pressure and temperature are unbalanced. Clean the evaporator or filter.
  5. Lack of fluorine is also possible.

    Why Is the Air Conditioner Flashing Yellow and the Compressor Not Working?1728562120034

    When there is a lack of fluorine, the exhaust temperature of the compressor will be overheated, causing the overheating load protection switch to trip.
    Problems in the circuit are:
  6. Fault of the control circuit board.
  7. Overload of the temperature sensor and incorrect information.
  8. Loose power connection and poor contact.

    Why Is the Air Conditioner Flashing Yellow and the Compressor Not Working?1728562120081

  9. The starting capacitor or the compressor starting coil is burned out.
head photo
HAIDING
Cooling and Heating Technology
20-Year
Haiding